Concrete-mesa | Concrete Admixtures, Tools, and Production Machines

Factory Hot ing 7.5x35mm Hooked End Steel Fiber for Concrete
PRODUCT PARAMETERS
Description
Overview of Factory Hot ing 7.5x35mm Hooked End Steel Fiber for Concrete
For high-impact resistance, we offer Steel Fibers, an ideal replacement for welded wire mesh in industrial floors and pre-cast elements. We also provide specialized Structural Synthetic Fibers that offer high tensile strength for demanding applications. These fibers are uniformly dispersed throughout the concrete mix, creating a multi-dimensional reinforcement network that traditional methods cannot achieve. This integrated approach simplifies construction, accelerates placement, and enhances the overall integrity and longevity of the concrete, providing a modern answer to age-old cracking and durability challenges.
Features of Factory Hot ing 7.5x35mm Hooked End Steel Fiber for Concrete
1. Superior Crack Control and Enhanced Durability:
The primary feature of our fibers is their ability to bridge both micro-cracks that form during the plastic state and larger cracks in hardened concrete. This three-dimensional dispersion creates a more cohesive matrix that resists crack propagation. The direct benefit is a significant reduction in both plastic shrinkage cracking and long-term crack width. This leads to a much more durable concrete with lower permeability, which in turn enhances resistance to water ingress, freeze-thaw damage, and corrosion of any embedded steel. The result is a structure with a longer service life and reduced maintenance costs.
2. Increased Impact and Abrasion Resistance:
Fibers, particularly steel and robust synthetic macro fibers, dramatically improve the concrete’s toughness and post-crack performance. They absorb and distribute energy upon impact or loading. This feature provides the benefit of a more resilient surface that is less prone to spalling, chipping, and abrasion under heavy traffic or mechanical wear. This is a critical advantage for industrial floors, warehouse pavements, and infrastructure projects, leading to a harder-wearing surface that maintains its integrity over time.
3. Construction Efficiency and Cost Savings:
A key feature of using fiber reinforcement is the elimination of welded wire mesh (WWF) in many applications. This provides immense on-site benefits: it simplifies placement, as there is no mesh to be set up or potentially displaced, and it accelerates the entire construction process. By removing a labor-intensive step, projects see reduced labor costs and faster project timelines. The uniform distribution of fibers also ensures consistent reinforcement throughout the entire concrete section, unlike mesh, which can be improperly placed, leading to more reliable and predictable performance.

Specifications of Factory Hot ing 7.5x35mm Hooked End Steel Fiber for Concrete
This steel fiber is for concrete. It is made in a factory. The fiber is 35 millimeters long. The diameter is 0.75 millimeters. This fiber has a hook on each end. The hook helps it grip the concrete better. It is made from strong steel wire. The wire is cold drawn. Then it gets cut to length. The hooks are added right after cutting. The hooks are formed while the steel is hot. This hot process makes the hooks strong. The steel is a low-carbon type. It has good tensile strength. Tensile strength is how much pull it can handle. This fiber has a high aspect ratio. Aspect ratio is length divided by diameter. A high ratio means it works well in concrete.
These fibers are mixed into wet concrete. They spread out all through the mix. The hooks grab onto the concrete tightly. This holds the concrete together. It makes the concrete much tougher. The concrete resists cracking better. It handles impacts better too. It improves flexural strength. Flexural strength is bending strength. The fibers stop cracks from spreading. This is good for floors and pavements. It is good for industrial slabs. It helps in shotcrete applications too. Shotcrete is sprayed concrete. Using fibers can replace some rebar or wire mesh. It saves time and labor sometimes.
The fibers come in bags. Each bag holds a standard weight. The weight is usually 25 kilograms. The fibers are loose inside the bag. You just pour them into the concrete mixer. Use the amount the engineer specifies. The right dosage depends on the project. It depends on how strong the concrete needs to be. Always follow the project plans.
Applications of Factory Hot ing 7.5x35mm Hooked End Steel Fiber for Concrete
This steel fiber has hooked ends. It measures 7.5mm long and 35mm long. You mix it into concrete. It makes the concrete much tougher. It stops cracks from spreading fast. It holds the concrete together better. This fiber is good for many tough jobs.
Industrial floors see heavy use. Forklifts drive on them. Heavy machines cause stress. This fiber strengthens the floor. It reduces cracking from heavy loads. It cuts down on joint problems. You need less steel rebar sometimes. The floor lasts longer.
Precast concrete parts use this fiber too. Think wall panels or tunnel segments. Handling and moving these parts can cause damage. The fiber reinforcement protects them. It stops small cracks during transport. The parts stay strong for installation.
Shotcrete applications benefit greatly. Spraying concrete on walls or slopes is common. Adding this fiber helps the wet mix stick better. It reduces rebound loss. The sprayed layer holds together well. It gains strength quickly. This is vital for soil stabilization or mining work.
Refractory linings face high heat. Furnaces and kilns need durable linings. Regular concrete cracks under thermal stress. This hooked fiber boosts thermal shock resistance. The lining handles rapid heating and cooling cycles better. It survives longer in extreme heat.
Concrete overlays repair old surfaces. These thin layers can crack easily. Adding this fiber prevents that. It bonds well to the old concrete. The new surface resists shrinkage cracks. It stands up to traffic faster. The repair job holds up.
Warehouse floors take constant abuse. This fiber reinforcement is ideal. It combats cracking from shrinkage and loads. The surface stays smoother longer. It needs less maintenance over time. Forklift wheels cause less damage.
Parking garages and pavements use it. It improves impact resistance. Vehicles cause less surface damage. The concrete handles freeze-thaw cycles better. It provides extra durability. The structure requires fewer repairs.
Company Profile
We are the global leader in lightweight concrete and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.
We can supply high-quality concrete admixture and foam concrete related products all over the world.
The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are interested, please feel free and contact us.
Payment
T/T, Western Union, Paypal, Credit Card etc.
Shipment
By air, by sea, by express, as customers request.
5 FAQs of Factory Hot ing 7.5x35mm Hooked End Steel Fiber for Concrete
People ask why use hooked end steel fibers in concrete. These fibers make concrete stronger. They stop cracks from spreading. They help concrete handle heavy loads better. Concrete becomes tougher with these fibers.
What are the main benefits? Using fibers reduces cracking a lot. You need less steel rebar. This saves time and money. Fibers spread throughout the concrete. They hold it together everywhere. The concrete lasts longer.
How much fiber should be added? The usual amount is between 20 and 40 kilograms per cubic meter of concrete. The exact amount depends on the project. Thicker slabs need more fiber. Softer concrete mixes need more fiber. Ask your supplier for the best dosage.
Do these fibers need special mixing? You mix them like normal concrete. Use standard concrete mixers. Add the fibers after the other materials. Mix for a few minutes longer. This spreads the fibers evenly. Do not mix for too long. Too long can damage the fibers.
Where are these fibers used best? They work well in industrial floors. Warehouses and factories use them. They are good for precast concrete parts. Tunnels and mining areas use them. Any place needing strong, crack-resistant concrete is suitable.






