Contact Form

Hot High Expansion Foaming Agent for Foam Concrete CLC Foaming Agent

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Hot High Expansion Foaming Agent for Foam Concrete CLC Foaming Agent

Hot High Expansion Foaming Agent for Foam Concrete CLC Foaming Agent is a surfactant that generates large quantities of uniform, stable foam through physical or chemical means. When this foam is thoroughly mixed with cement-based slurry (cement, fly ash, etc.) and cured naturally or with steam, it forms a novel lightweight material—foam concrete—internally filled with numerous closed air cells.

Features of Hot High Expansion Foaming Agent for Foam Concrete CLC Foaming Agent

1. High Foam Multiplication Ratio: High foam multiplication ratio allows for dilution before use. One kilogram of concentrate generates a large volume of uniform foam, delivering significant cost savings.

2. Strong Foam Stability: Produces resilient, uniformly fine foam walls that resist collapse or breakage. Effectively withstands pressure from cement slurry, ensuring independent and sealed air cells within the finished product.

3. Uniform and Fine Pore Structure: The foam concrete exhibits an ideal internal structure of closed spherical micro-pores, guaranteeing superior physical properties.

4. Low Material Consumption: Achieves equivalent density and strength grades with lower dosage than standard market products, reducing costs.

5. Eco-friendly and safe: Neutral formulation, non-toxic, odorless, and non-corrosive, posing no harm to the environment or human health. Classified as a green building material.

6. Wide adaptability: Excellent compatibility with various cements (including ordinary Portland cement and aluminate cement) and admixtures. Rapid foaming action with extended foam stability.

Specifications of Hot High Expansion Foaming Agent for Foam Concrete CLC Foaming Agent

This foaming agent creates lightweight foam concrete. It expands a lot when mixed with water. The expansion ratio is high. This means small amounts make large volumes of foam. The expansion ratio typically reaches 30 times or more. This high expansion is key for efficient production.

The foam produced gives concrete low density. We control the final concrete density easily. Target densities range from 400 kg/m³ to 1600 kg/m³. Adjust the foam amount added to the cement slurry. More foam means lighter concrete. Less foam gives stronger, denser material.

The foam bubbles are very stable and uniform. Tiny, closed bubbles form throughout the mixture. This structure is crucial. It prevents the foam from collapsing too fast. It ensures the concrete sets properly. Good bubble structure improves final strength and insulation.

This agent works well with common cement types. Use it with Portland cement, fly ash, or slag cement. It also works with various additives. Compatibility is reliable. The foam mixes evenly into the cement slurry. It integrates smoothly without breaking down quickly.

The agent comes as a concentrated liquid. Dilute it with water before use. Typical dilution ratios are between 1:30 and 1:50 parts agent to water. Follow the specific product instructions for best results. Proper dilution ensures optimal foam quality and expansion.

Storage is simple. Keep the concentrate in its original container. Store it in a cool, dry place. Avoid direct sunlight and freezing temperatures. The product remains stable for many months when stored correctly. Always check the expiry date on the packaging.

Applications of Hot High Expansion Foaming Agent for Foam Concrete CLC Foaming Agent

This Hot High Expansion Foaming Agent makes strong, lightweight foam concrete. Builders use it for many important jobs. Mix this agent with water and cement. It creates millions of tiny, tough air bubbles. These bubbles make the concrete much lighter. Lightweight concrete is easier to handle. It puts less stress on buildings and the ground below.

One main use is for insulation. The tiny air pockets trap heat. Foam concrete made with this agent keeps heat inside buildings in winter. It keeps heat out in summer. This saves energy and lowers heating and cooling costs. Builders pour it into walls, floors, and roofs for this insulation effect.

Another big use is making lightweight blocks and panels. This foaming agent helps create very light concrete blocks. These blocks are easy to move and stack. Construction goes faster. The blocks are strong enough for walls in houses and other buildings. They cut down the overall weight of the structure. That saves money on foundations and support.

Filling empty spaces is also important. This agent makes foam concrete that flows well before it hardens. It fills trenches, old pipes, and holes under roads perfectly. The foam expands to fill every gap. It hardens solidly and stays put. This prevents ground sinking later. It provides stable support quickly.

Builders like this agent because it works reliably. It makes consistent, stable foam. The bubbles don’t collapse easily. This means the final concrete has even quality. The agent is non-toxic and safe to handle. It helps create durable, useful foam concrete for modern building needs.

Company Profile

We are the global leader in lightweight concrete and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.

We can supply high-quality concrete admixture and foam concrete related products all over the world.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are interested, please feel free and contact us.

Payment

T/T, Western Union, Paypal, Credit Card etc.

Shipment

By air, by sea, by express, as customers request.

5 FAQs of Hot High Expansion Foaming Agent for Foam Concrete CLC Foaming Agent

What is Hot High Expansion Foaming Agent?
It’s a special liquid chemical. You mix it with water and air. This makes foam. This foam gets mixed into cement slurry. It creates lightweight foam concrete. This type needs high heat to work best. It expands a lot.

How much expansion can I expect?
This agent expands greatly. It can make foam 30 times bigger than the original liquid volume. Exact expansion depends on the water ratio. It also depends on the mixing pressure. Follow the manufacturer’s instructions carefully. This ensures you get the maximum expansion for strong, lightweight concrete.

Why does it need heat?
Heat activates this foaming agent. Warm water makes the reaction faster. It also makes the foam bubbles stronger. Stronger bubbles mean better stability. Stable foam prevents collapse when mixed with cement. This gives you a more uniform concrete structure. Cold water works poorly. It makes weak foam.

Is it safe to handle?
Wear gloves and safety glasses. Avoid skin contact. Avoid eye contact. It can cause irritation. Work in a well-ventilated area. Keep it away from children. Rinse spills immediately with water. Check the product’s Safety Data Sheet (SDS) for full details. Always follow safe handling rules.

How should I store it?
Keep the container tightly closed. Store it in a cool, dry place. Keep it away from direct sunlight. Keep it away from heat sources. Extreme heat damages the product. Don’t let it freeze. Proper storage makes it last longer. Usually, it lasts 6-12 months if stored correctly.

REQUEST A QUOTE

REQUEST A QUOTE