Contact Form

High Concentration Protein Foaming Agent for Lightweight Concrete CLC Blocks Concrete Foaming Agent

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of High Concentration Protein Foaming Agent for Lightweight Concrete CLC Blocks Concrete Foaming Agent

High Concentration Protein Foaming Agent for Lightweight Concrete CLC Blocks Concrete Foaming Agent is a surfactant that generates large quantities of uniform, stable foam through physical or chemical means. When this foam is thoroughly mixed with cement-based slurry (cement, fly ash, etc.) and cured naturally or with steam, it forms a novel lightweight material—foam concrete—internally filled with numerous closed air cells.

Features of High Concentration Protein Foaming Agent for Lightweight Concrete CLC Blocks Concrete Foaming Agent

1. High Foam Multiplication Ratio: High foam multiplication ratio allows for dilution before use. One kilogram of concentrate generates a large volume of uniform foam, delivering significant cost savings.

2. Strong Foam Stability: Produces resilient, uniformly fine foam walls that resist collapse or breakage. Effectively withstands pressure from cement slurry, ensuring independent and sealed air cells within the finished product.

3. Uniform and Fine Pore Structure: The foam concrete exhibits an ideal internal structure of closed spherical micro-pores, guaranteeing superior physical properties.

4. Low Material Consumption: Achieves equivalent density and strength grades with lower dosage than standard market products, reducing costs.

5. Eco-friendly and safe: Neutral formulation, non-toxic, odorless, and non-corrosive, posing no harm to the environment or human health. Classified as a green building material.

6. Wide adaptability: Excellent compatibility with various cements (including ordinary Portland cement and aluminate cement) and admixtures. Rapid foaming action with extended foam stability.

Specifications of High Concentration Protein Foaming Agent for Lightweight Concrete CLC Blocks Concrete Foaming Agent

This high concentration protein foaming agent makes strong, stable foam for lightweight CLC blocks. It uses special proteins. These proteins create very fine bubbles. Fine bubbles are key for good concrete.

The product is highly concentrated. You mix it with a lot of water before use. This saves money on shipping and storage. One container makes a large volume of ready foam. You control the dilution rate. This lets you adjust the foam density for different block strengths.

The foam forms quickly. The bubbles are very small and uniform. Small bubbles mix better into the cement slurry. They create a more even cell structure inside the hardened block. This means stronger, more consistent CLC blocks.

The foam lasts a long time. It doesn’t collapse easily during mixing and pouring. This stability is crucial. It ensures the air stays trapped in the concrete until it hardens. You get the designed lightweight properties and insulation values.

It works well with common cement types and additives. You don’t need special equipment. Standard foam generators handle it fine. The agent is free from harsh synthetic chemicals. It relies on natural protein power. This makes it safer to handle and more environmentally friendly than synthetic options.

Using this agent improves block quality. It reduces material waste. It helps achieve precise density control. Builders get reliable, lightweight concrete blocks with good thermal and sound insulation.

Applications of High Concentration Protein Foaming Agent for Lightweight Concrete CLC Blocks Concrete Foaming Agent

High concentration protein foaming agents make lightweight concrete CLC blocks. This agent creates many small, stable air bubbles in the concrete mix. The result is strong, lightweight blocks. Builders use these blocks for walls, insulation panels, and filling voids.

This foaming agent uses natural proteins. The proteins are processed carefully. They form very tough bubbles. These bubbles resist collapse during mixing and pouring. Strong bubbles mean a consistent, even mix every time. The concrete stays lightweight but gains good strength.

High concentration is key. Less product is needed per batch. This saves money. It also makes storage and transport easier. Workers mix a small amount with water first. This creates a stable foam. Then they add this foam to the cement, sand, and water mixture. The foam fills the mix with tiny air pockets. These pockets make the concrete lighter.

The blocks made this way have many advantages. They are much lighter than regular concrete blocks. This makes them easier to handle and install. It reduces structural load on buildings. The air pockets give excellent thermal insulation. Buildings stay warmer in winter and cooler in summer. This saves energy. The blocks also provide good sound insulation. They are fire resistant too.

Builders use these CLC blocks for different jobs. They build exterior and interior walls. They create partition walls inside buildings. They fill voids in structures needing lightweight material. They make insulation panels for roofs and floors. The density can be adjusted. Blocks range from very light for insulation to stronger for load-bearing walls. Common densities are between 400 and 1800 kg per cubic meter.

Protein foaming agents are better than chemical ones. They are natural and eco-friendly. They create stronger, more stable bubbles. This leads to higher quality blocks. The blocks are more durable. They resist cracking better. The surface finish is smoother. This makes plastering easier. Builders get reliable, high-performance lightweight concrete.

Company Profile

We are the global leader in lightweight concrete and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.

We can supply high-quality concrete admixture and foam concrete related products all over the world.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.

If you are interested, please feel free and contact us.

Payment

T/T, Western Union, Paypal, Credit Card etc.

Shipment

By air, by sea, by express, as customers request.

5 FAQs of High Concentration Protein Foaming Agent for Lightweight Concrete CLC Blocks Concrete Foaming Agent

What makes high concentration protein foaming agent different?
It packs more active material into each liter. You use less product to make the same amount of foam. This saves money. It also cuts shipping costs because you move less liquid.

Why is stable foam important for CLC blocks?
Stable foam creates strong, even bubbles in the concrete mix. Weak foam collapses too soon. This causes weak spots or uneven density in the finished blocks. Good foam means reliable, strong lightweight blocks.

How do I use this high concentration agent?
You must dilute it with water first. Follow the supplier’s mixing ratio exactly. Using it straight from the container will not work right. The correct dilution gives the best foam performance for your concrete.

Does this agent work with all cement types?
Generally, yes. It works well with common Portland cement. It also works with fly ash or slag blends often used in CLC. Always test a small batch first with your specific materials. This confirms compatibility before full production.

How long can I store this foaming agent?
Stored properly, it lasts 6 to 12 months. Keep it in its original sealed container. Store it in a cool, shaded place. Avoid freezing temperatures. Avoid direct sunlight. Extreme heat or cold damages the protein.

REQUEST A QUOTE

REQUEST A QUOTE